Stump Grinding
in Maynard, MA
Fast, thorough stump grinding that removes the eyesore and frees up your yard. Serving Maynard and the Merrimack Valley.
What Does Stump Grinding
Look Like in Maynard?
Stump grinding in Maynard is mostly about access. The lots downtown and in Assabet Village are tight, and getting the grinder into a small backyard through a narrow gate or between two houses is half the job. Once the machine's in place, most single stumps take 45 minutes to a couple of hours. We're about 30 minutes from Billerica and out in Sudbury and Acton next door most weeks, so we fit Maynard stump work into the MetroWest run.
We grind 8 to 12 inches below grade as standard — enough for grass seed, garden beds, or a patio. The older oaks and maples on Maynard's established lots leave wide stumps, and the tight quarters mean we sometimes work the grinder in close to foundations, fences, and walkways. The machine handles that precisely; we've ground stumps in spots where there were only a few inches to spare on either side.
If your stump is near the Assabet River, there are equipment-operation restrictions inside the 100-foot buffer and the 200-foot Riverfront Area under MGL Chapter 131. Grinding a stump from a tree that's already gone is usually approvable since it's not new disturbance, but we confirm the rules before we mobilize.
If we just took the tree down, grinding the stump the same day is the smart move in Maynard — getting the machine onto a tight lot once instead of twice saves you a second mobilization, which matters more here than out in the open towns. We bring the grinder on most removal jobs; just ask for it when you call.
Common Stump Grinding
Projects in Maynard
Single stump grinding after tree removal
Multi-stump grinding for lot clearing
Surface root grinding for lawn restoration
Stump grinding for new landscaping
Stump grinding for construction prep
Old stump removal for property improvement
Our Work in
Maynard
A run that puts us in Maynard: a mature oak rigged down piece by piece on a tight lot off Summer Street, a storm-cracked pine leaning over a neighbor's roof in Assabet Village, deadwood pruning on street-side maples near downtown, and a Conservation Commission-permitted removal of a silver maple inside the Assabet River buffer. We bundle Maynard work with our Sudbury, Acton, and Concord jobs so the trip from Billerica makes sense.
How Much Does Stump Grinding
Cost in Maynard, MA?
Stump Grinding in Maynard, MA typically costs $150 - $300 per stump. McDonald Tree Service provides free estimates with guaranteed pricing — the estimate is the price you pay, with no hidden fees or surprise charges.
| Stump Size | Diameter | Cost per Stump |
|---|---|---|
| Small | Under 12" | $150 – $200 |
| Medium | 12 – 24" | $200 – $250 |
| Large | 24"+ | $250 – $300+ |
Single stump grinding in Maynard runs $160 to $280 for stumps under 24 inches with workable access. Large stumps — 30-plus inches — run $280 to $450. On tight Maynard lots the access drives the price: a stump you reach through a narrow gate or between houses sits at the higher end because setup is the slow part. Multi-stump packages are cheaper per stump. If we removed the tree the same day, we bundle the stump into the removal price. Chip haul-away is included unless you want them left for mulch.
Keith’s
Take
I ground a stump in Assabet Village last summer that was the definition of a Maynard job — a 28-inch maple stump in a backyard you reached through a 34-inch gate, with the foundation three feet on one side and a fence two feet on the other. We threaded the machine in on plywood, ground it below grade working tight to both, and put the gate and the lawn back like we'd never been there. On these lots the careful access is most of what you're paying for, and it's exactly what a cheap crew gets wrong.
How It
Works
01
Give Us the Details
Call (978) 375-2272. Tell me the rough diameter of the stump and the access — driveway, a gate width, stairs, or a path between houses. On Maynard's tight lots access is the variable that drives both the schedule and the price, so the more you can tell me, the better the ballpark I can give over the phone.
02
We Confirm Access and Schedule
We confirm the best path to the stump — and on a tight lot, whether the standard grinder fits or we bring a smaller machine. Because Maynard is a drive, we'll often schedule it alongside our Sudbury and Acton work that week. For stumps near the Assabet River, we check the conservation restrictions first.
03
Grind, Rake, Done
The grinder takes the stump and roots 8 to 12 inches below grade. We rake the chips into the hole and grade it level. Seed over it right away or let it settle first. Chips stay as mulch or we haul them. On a tight lot we put the gate, the fence, and the lawn back exactly as we found them.
Maynard
Permits
Maynard, MA does not require a permit for routine tree removal on your own private property. The exceptions: trees within 100 feet of a wetland or the Assabet River require Conservation Commission review under the Wetlands Protection Act (MGL Chapter 131, Section 40), with the 200-foot Riverfront Area applying along the river. Public shade trees in the town right-of-way require Tree Warden approval and a public hearing under MGL Chapter 87. We tell you exactly what applies at the estimate — call (978) 375-2272.
Permit rules change. Confirm with your municipality. We can help — call (978) 375-2272.
Maynard
on the Map
Why Us
30+
Years in Business
24/7
Emergency Response
Technical rigging removals on Maynard's tight downtown and Assabet Village lots
Already working bordering Sudbury, Acton, and Concord — we're out that way regularly
Assabet River wetland-buffer permitting handled in-house
Owner-operator since 1995 — Keith on every job, fully insured, zero subcontractors
Stump Grinding in Maynard
Questions & Answers
Can you get a stump grinder into a tight Maynard backyard?
Usually, yes. Our standard grinder fits through most gates, and we've worked plenty of tight downtown and Assabet Village lots. If the only access is a narrow path, stairs, or a gap between houses, tell us at booking — we'll bring a smaller machine if we need to. On Maynard's lots, access is the thing that determines both whether we can do it and what it costs.
How deep do you grind stumps in Maynard?
We grind 8 to 12 inches below the original grade as standard, which is enough for grass seed, garden beds, and most projects. If your Maynard project needs a specific depth — sometimes 18 inches for a patio base — tell us at booking and we'll accommodate it. Deeper grinding adds time but not much cost.
Can you grind a stump close to my foundation or fence?
Yes. On Maynard's tight lots that's routine — the grinder works precisely, and we've taken stumps out with only a few inches to spare from foundations, walkways, and fences without damaging them. Tell us what's nearby at booking so we bring the right setup and protect it.
Can you grind a stump near the Assabet River?
In most cases, yes. Properties within the 100-foot wetland buffer or the 200-foot Riverfront Area of the Assabet River fall under Conservation Commission review per MGL Chapter 131, Section 40. Grinding a stump from a tree already removed is typically approvable because it's not new disturbance, but we confirm before we mobilize. We've handled the buffer rules on the rivers in Concord and Sudbury.
Do you offer same-day stump grinding after a removal in Maynard?
Whenever we can, yes — and on a tight Maynard lot it's especially worth it. Getting the grinder onto the lot once instead of twice saves you a second mobilization charge, which matters more here given the access and the drive from Billerica. We bring the grinder on most removal jobs; just ask when you call for the estimate.
Ready to get
it done?
Got a stump wedged in a tight Maynard backyard, or a few left from a removal? Call (978) 375-2272 for a price — we'll tell you up front whether the standard grinder fits or we need to bring the small machine.
24/7 Emergency Available